KidKraft OVERLAND HEIGHTS SWING SET Installation And Operating Instructions Manual

OBSTACLE FREE SAFETY ZONE - 27' 6" x 27' (8.38m x 8.2m) area requires Protective Surfacing. See page 4.

MAXIMUM VERTICAL FALL HEIGHT - 6' 9" (2.06m).

CAPACITY - 12 Users Maximum, Ages 3 to 10; Weight Limit 110 lbs. (50 kg) per child.

RESIDENTAL HOME USE ONLY. Not intended for public areas such as multi-unit residences, schools, churches, nurseries,

day cares or parks.

INSTALLATION AND OPERATING INSTRUCTIONS

FOR 24/7 ONLINE PARTS REPLACEMENT

parts.kidkraft.com

KidKraft, Inc.

4630 Olin Road

Dallas, Texas 75244

customerservice@kidkraft.com

1.800.933.0771

972.385.0100

parts.kidkraft.eu

KidKraft Netherlands BV

Olympisch Stadion 8

1076 DE Amsterdam

The Netherlands

europecustomerservice@kidkraft.com

+31 20 305 8620

M-F from 09:00 to 17:30 (GMT+1)

To reduce the risk of serious injury or death, please read and follow

these instructions. Keep and refer to instructions as needed and

pass along to any future owners of this item.

Rev 01/12/2022

ASSEMBLY TIME

WARNING. ONLY

FOR OUTDOOR

10 - 14 HOURS

DOMESTIC USE

Related Manuals for KidKraft OVERLAND HEIGHTS SWING SET

Table set with trundle (7 pages)

Playset (154 pages)

Play system (57 pages)

Hilltop playset (117 pages)

2-in-1 playset (144 pages)

Summary of Contents for KidKraft OVERLAND HEIGHTS SWING SET

• Page 1 13' 8" JAZZ INSTALLATION AND OPERATING INSTRUCTIONS FOR 24/7 ONLINE PARTS REPLACEMENT 9409655 Rev 01/12/2022 parts.kidkraft.com parts.kidkraft.eu KidKraft, Inc. KidKraft Netherlands BV 4630 Olin Road Olympisch Stadion 8 TWO-PERSON ASSEMBLY TIME WARNING. ONLY FOR OUTDOOR ASSEMBLY 10 - 14 HOURS.
• Page 2 Congratulations on purchasing a KidKraft product! Our items are made of high-quality, durable Cunninghamia Lanceolata wood from the cypress family. Lumber from these trees are known for their light weight and excellent strength. The porosity of this wood allows the moisture to absorb and evaporate in the fibers, resisting rot and bugs.
• Page 3 Warnings and Safe Play Instructions CONTINUOUS ADULT SUPERVISION REQUIRED. Most serious injuries and deaths on playground equipment have occurred while children were unsupervised! Our products are designed to meet mandatory and voluntary safety standards. Complying with all warnings and recommendations in these instructions will reduce the risk of serious or fatal injury to children using this play system.
• Page 4 Protective Surfacing - Reducing Risk of Serious Head Injury From Falls One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable for the equipment height in accordance with ASTM F1292.
• Page 5 Instructions for Proper Maintenance Your KidKraft Play System is designed and constructed of quality materials with your child’s safety in mind. As with all outdoor products used by children, it will weather and wear. To maximize the enjoyment, safety and life of your Play Set, it is important that you, the owner, properly maintain it.
• Page 6 About Our Wood KidKraft Premium Play Systems uses only premium playset lumber, ensuring the safest product for your children’s use. Although we take great care in selecting the best quality lumber available, wood is still a product of nature and susceptible to weathering which can change the appearance of your set.
• Page 7 KidKraft Limited Warranty MISSING OR DAMAGED PARTS: KidKraft will replace any parts within 90 days from date of purchase found to be missing from or damaged in the original packaging. See Fig.1 Fig. 1 Product Age (All Parts) Consumer Pays.
• Page 8 Keys to Assembly Success Tools Required • Tape Measure • #1 Phillips, #2 Robertson • Open End Wrench • 3/16” Hex Key • Carpenters Level and Screwdriver (1/2” & 9/16”) • 8’ Step Ladder • Carpenters Square • Ratchet with extension •.
• Page 9 Part Identification (Next Generation A) Actual Size Nominal Size (1) MK Ground 1 x 4 x 55-1/4" (16 x 86 x 1403mm) ⅜ " x 3 ⅜ " 2" x 4" 0353 2" x 3" ⅜ " x 2½" 3640353 1".
• Page 10 ADD ON C Parts (Reduced Part Size) 2pc. - 5536 - 5/8 x 2 x 6-3/4" (16 x 51 x 171mm) - Counter Side - 38045536 1pc. - 2686 - 5/8 x 2-3/4 x 40-5/8" (16 x 70 x 1032mm)- Counter Front - 3632686 2pc.
• Page 11 Next Generation C (Actual Part Size) 2pc. TN1 - 1/4" (6mm) T - Nut (54503200) Hex Bolt 1/4 x 2-3/4" (6 x 70mm) 2pc. H11 - (53703223) 2pc. FW1 - 1/4" (6mm) Flat Washer (51103200) 2pc. LW1 - 1/4" (6mm) Lock Washer (51303200) #6 x 30mm 20pc.
• Page 12 Part Identification (Add on E) 2pc. - 2756 Siding Assembly 1¼ x 19-15/16 x 39-3/16" (32 x 506 x 995mm) 37632756 1pc. - 2658 - 2-13/32 x 6-3/4 x 34" (61 x 171 x 864mm) Folding Bench 37632658 2pc. - 649A Short Half Wall - 1.27 x 18.8 x 20-15/16".
• Page 13 Add On D Hardware (Actual Size) 36pc. TN1 - 1/4" (6mm) T - Nut 5pc. FW0 - 3/16" (5mm) Flat Washer - (54503200) (51103100) 9pc. LW2 - 5/16" (8mm) Lock Washer - (51303300) 42pc. FW1 - 1/4"(6mm) Flat Washer - 10pc.
• Page 14 Add On D Hardware (Actual Size) Wafer Bolt 5/16 x 1" Wafer Bolt 5/16 x 3" (8 x 76mm) 2pc. WB1 - - (53613310) 3pc. WB7 - - (53613330) (8 x 25mm) Hex Bolt 1/4 x 1-1/4" 24pc. H9 - - (53703211) 1/4 x 1-3/8".
• Page 15 Part Identification (Add on E) 1pc. - 2757 1pc. - 2648 - 1 x 4 x 40-5/8 (16 x 86 x 1032mm )- Floor Board 3632648 LT Post Assembly 1¼ x 2½ x 87" (32 x 64 x 2210mm ) 8pc.
• Page 16 Part Identification (Next Generation F) 4pc. - 2759 Roof End 1-1/4 x 3 x 10" (32 x 76 x 254mm) 3632759 4pc. - 2760 - Roof Support 1¼ x 2¼ x 37½" (32 x 57 x 953mm ) 3632760 2pc. - 2761 - Roof Sleeper C ¾ x 2 x 35" (19 x 51 x 889mm ) 2x - Sky Gable (3320212) 3632761 2pc.
• Page 17 If there are any missing or damaged pieces or you need assistance with assembly please contact the consumer relations department directly. Call us before going back to the store. 1.800.933.0771 or 972.385.0100 +31 20 305 8620 europecustomerservice@KidKraft.com customerservice@kidkraft.com For online parts replacement visit canadacustomerservice@kidkraft.com https://parts.kidkraft.eu/ For online parts replacement visit https://parts.kidkraft.com/.
• Page 18 Step 1: Front and Back Wall Prep Part 1 It is important to assemble the frame on a flat, smooth surface. A: Place (2771) End Post and (2770) End Post Left side by side with the grooves facing up and in. Put (2770) End Post Left on the right hand side.
• Page 19 Step 1: Front and Back Wall Prep Part 2 It is important to assemble the frame on a flat, smooth surface. D: Turn the assembly over, place (2774) Upright in the middle groves of (2775) Panel Cross Support and (2772) Panel Floor Support then attach all boards with 8 (H9) Hex Bolts (with lock washer and flat washer) connecting to the previously installed t-nuts.
• Page 20 Step 2: End Wall Prep Part 1 It is important to assemble the frame on a flat, smooth surface. A: Place (2768) Panel Floor and 2 (2769) Panel BT Frames on a hard, flat surface with the long side up. Tap in 2 (TN1) T-nuts per board.
• Page 21 Step 2: End Wall Prep Part 2 It is important to assemble the frame on a flat, smooth surface. D: Turn the assembly over then attach all boards with 6 (H9) Hex Bolts (with lock washer and flat washer) connecting to the previously installed t-nuts. (fig. 2.3 and 2.4) Fig.
• Page 22 Step 3: Swing Wall Prep Part 1 It is important to assemble the frame on a flat, smooth surface. A: Place (2757) LT Post Assembly and (2758) RT Post Assembly on a hard, flat surface with the notches facing down. The top of the post assemblies have the longer notches. (fig. 3.1) B: Tap 1 (TN2) T-nut in the top holes and 1 (TN1) T-nut in the middle and bottom holes.
• Page 23 Step 3: Swing Wall Prep Part 2 It is important to assemble the frame on a flat, smooth surface. C: Turn the (2757) LT Post Assembly and (2758) RT Post Assembly over and place 2 (2756) Siding Assemblies on top so one sits flush with the top of the middle groove and the second fits flush with the top of the bottom groove.